Fade to Light Jacket MAL: Part 2. Raglan increases



Hello and welcome to Part 2 of the Fade to Light Jacket make-a-long. Today we will talk about raglan increases and will continue growing our yoke. In the very end of this part we will divide yoke for body and sleeves, and I will show you the ways how to adjust measurements for your own bust. If this is the first time you hear about Fade to Light Jacket MAL, please also check blog posts about reveal, gauge and short rows

DUTCH translation is available HERE. Translated by Carmen Jorissen of New Leaf Designs

As you already know, Fade to Light Jacket is a top-down garment. Last week we made short rows and this week we will continue “building” raglan lines. We have four raglan lines (two on front and two on the back) – they separate front and back from sleeves. 

Raglan increases consist of several sets, please, follow instructions for your own size carefully. You can either use stitch markers to stay on track with increases, or write everything you made down on paper. Or you can also use this handy tool. It’s called Row Counter Ring (by KnitPro company). You can find it in local Scheepjes shops, on Wool Warehouse* (UK), or Amazon*

In the video below I explain how to use it for Fade to Light Jacket, but I am sure it will be very helpful for all your future projects too. 

And just a reminder, complete Fade to Light Jacket pattern is available for purchase on HERE on Ravelry or HERE on Etsy (both in English with US terms, and Dutch). Please, note that these files only include written instructions and no progress pictures.

***


INSTRUCTIONS

 Copyright! An original LillaBjörnCrochet Design (Tatsiana Kupryianchyk). Copyright 2014-2020. All rights reserved. This pattern is for personal use only. It cannot be sold, redistributed or edited in any way. Translations and video tutorials are not allowed. You can sell your finished products, but you cannot use my pictures to promote them. Please, always note me as a designer of this pattern. Thank you!

 

INCREASES for raglan 

Note: If you are using two Whirls, continue alternating cakes after every two rows. The yarn will be changed on the last yarn over of the row to complete final st. There will be floats of yarn along one of the edges. 

INC SET 1 – 2 rows 

Row 1 – RS (inc for body and sleeves): Ch1, 1sc in first st, *[ch1, sk sp, 1sc] until last sp and sc before next rm, ch1, sk sp, (1sc, ch1, 1sc) in next st, ch1 (pm), sk sp, (1sc, ch1, 1sc) in next st; rep from * 3 more times, [ch1, sk sp, 1sc] to end, turn. 

Row 2 – WS (no inc): Ch1, 1sc in first st, [ch1, sk sp, 1sc] to end, turn. 

Repeat Rows 1-2: 2 (3, 5, 5, 5, 7, 5, 6, 6, 8) more times. 

You’ll have one ch1-sp sp in every raglan seam (marked), 55 (63, 71, 71, 75, 83, 79, 83, 83, 95) sts for back, 29 (33, 37, 37, 39, 43, 41, 43, 43, 49) sts for each front and 27 (31, 39, 41, 41, 49, 43, 47, 47, 57) sts for each sleeve. 

INC SET 2 – 4 rows 

Row 1 – RS (inc for body and sleeves): Ch1, 1sc in first st, *[ch1, sk sp, 1sc] until last sp and sc before next rm, ch1, sk sp, (1sc, ch1, 1sc) in next st, ch1 (pm), sk sp, (1sc, ch1, 1sc) in next st; rep from * 3 more times, [ch1, sk sp, 1sc] to end, turn. 

Rows 2-4 (no inc): Ch1, 1sc in first st, [ch1, sk sp, 1sc] to end, turn. 

Repeat Rows 1-4: 5 (5, 4, 4, 5, 4, 6, 6, 6, 6) more times. 

You’ll have one ch1-sp sp in every raglan seam (marked), 79 (87, 91, 91, 99, 103, 107, 111, 111, 123) sts for back, 41 (45, 47, 47, 51, 53, 55, 57, 57, 63) sts for each front and 51 (55, 59, 61, 65, 69, 71, 75, 75, 85) sts for each sleeve. 

INC SET 3 – 2 rows (for M, XL, 2X, 3X, 4X and 5X only!) 

Row 1 – RS (inc for front and back): 

Front: Ch1, 1sc in first st, [ch1, sk sp, 1sc] until last sp and sc before next rm, ch1, sk sp, (1sc, ch1, 1sc) in next st, ch1 (pm), sk sp, 

Sleeve: 1sc in next st, [ch1, sk sp, 1sc] until next rm, 

Back: ch1 (pm), sk sp, (1sc, ch1, 1sc) in next st, [ch1, sk sp, 1sc] until last sp and sc before next rm, ch1, sk sp, (1sc, ch1, 1sc) in next st, ch1 (pm), sk sp, 

Sleeve: 1sc in next st, [ch1, sk sp, 1sc] until next rm, 

Front: ch1 (pm), sk sp, (1sc, ch1, 1sc) in next st, [ch1, sk sp, 1sc] to end, turn. 

Row 2 – WS (no inc): Ch1, 1sc in first st, [ch1, sk sp, 1sc] to end, turn. 

For 4X size ony! Rep INC SET 3 once more. 

You’ll have one ch1-sp sp in every raglan seam (marked), 79 (87, 91, 95, 99, 107, 111, 115, 119, 127) sts for back, 41 (45, 47, 49, 51, 55, 57, 59, 61, 65) sts for each front and 51 (55, 59, 61, 65, 69, 71, 75, 75, 85) sts for each sleeve. 

At this point yoke should measure approx. 21.5 (22.5: 22.5: 24.25: 25.25: 26.5: 29.25: 30.5: 31.5: 33.2) cm/ 8.5 (9: 9: 9.5: 10: 10.5: 11.5: 12: 12.4: 13) in. Depth of the yoke should be measured from mid sleeve down along the front’s edge (see schematics on page 9) 

SEPARATE BODY AND SLEEVES 

Separation row – RS: Ch1, 1sc in first st, *[ch1, sk sp, 1sc] to next rm, ch7 (7, 7, 9, 9, 9, 11, 11, 13, 13), sk sp with rm, sk all sts for a sleeve and next sp with rm, 1sc in next st; rep from * once more, [ch1, sk sp, 1sc] to end, turn – 175 (191, 199, 211, 219, 235, 247, 255, 267, 283) sts for the lower body, including two underarm chains. 

Next row – WS: Ch1, 1sc in first st, [ch1, sk sp, 1sc] to end (count every underarm ch as sp or st) making one increase on each front before underarm by working (1sc, ch1, 1sc) in same st – 179 (195, 203, 215, 223, 239, 251, 259, 271, 287) sts for the lower body. 

 

LOWER body 

Row 1 – RS: Ch1, 1sc in first st, [ch1, sk sp, 1sc] to end, turn. 

Row 2 – WS: Repeat Row 1 once more. 

That was Part 2. See you next week!

You can purchase a complete pattern in one print-friendly pdf file HERE on Ravelry or HERE on Etsy (both in English with US terms, and Dutch). Please, note that these files only include written instructions and no progress pictures. 

Subscribe to a newsletter not to miss a single post. You can also follow me on FacebookPinterest and Instagram.

 

You may also like:

9 comments

  1. Now I can truly have a fabulous reason for TGIF🤗❣️ Loving this MAL for my 2 sweaters! Thank you so much!

    ReplyDelete
  2. The increase set 3 doesn't include size L?

    ReplyDelete
    Replies
    1. Nope :) You should reach needed depth after two increasing sets.

      Delete
  3. Hello
    INC SET 2 – 4 rows
    Row 1 : inc
    Rows 2-4 (no inc)
    and the row 3 ??? no inc too?
    thank you for your reply

    ReplyDelete
    Replies
    1. Yes, that's correct. rows 2, 3 and 4 have no increases.

      Delete
  4. Hello, I am having fun with this pattern. A good challenge for me as I have never crocheted a garment. Your videos are very helpful! A question about Next row under Separate Body and Sleeves. Looks like an increase takes place at each underarm, but I missed you saying that in the video. For the first increase, would it be before the chain for the underarm? And the next would be after the second chain? That would place both increases in the front?

    ReplyDelete
    Replies
    1. Sorry for the late reply. I forgot about that increase, to be honest... But you should work as per pattern. You can place it anywhere. In line with underarms, or closer to fronts. But not at the back, probably. And it will make it looser.

      Delete
  5. Your video stops before the last two rows labeled "Lower Body". Are we supposed to do those too?

    ReplyDelete
    Replies
    1. You should work as per pattern. Videos don't show everything. :)

      Delete

© LillaBjörn's Crochet World. Design by MangoBlogs.